Hollow Core Slab Pallet

Installation & Anchoring Forms

There are many Hollow Core equipment manufacturers in today’s market. Hamilton Form Company can produce a pallet that will meet your needs for any brand. Our standard pallet can be designed to be self-stressing or non-self-stressing. With a standard 1⁄4” plate skin, transverse gussets on 12” centers, and continuous stiffeners and foot members our pallet will serve your needs for years of production.

Optional Features Include:

  • Variable product widths
  • Thicker skins for increased capacity and wear
  • Custom-designed equipment rail

Supporting Equipment Available:

  • Flat Deck Cleaner machine
  • Tarp Carts

Stairs

Hamilton Form designs and manufactures a stair form to fit your specific needs. A fixed tread stair unit may be cast in a flat position with fixed or adjustable sides for width adjustment. If your requirements call for different and variable products, Hamilton Form makes an adjustable System. The product is cast on edge with adjustable and removable treads. An internal soffit works as a template to adjust the riser from 6 inches to 7 inches. Landings and throat areas on both ends of the stair unit are adjustable from 6 inches thick to 10 inches thick.

Optional Features Include:

  • Tread units to accept copings
  • Multiple soffit sizes for different configurations
  • Soffit risers for multiple width products
  • Saf-T-Mate™ Catwalk System

Towers and Vaults

Stair/Elevator Towers and Vaults are built to match precasters’ requirements. Tower forms are designed to cast a single piece box for stairs or elevator shaft. Your product requirements determine minimum and maximum lengths, widths, and sizes it need to expand to. Wall thicknesses are adjustable by moving sidewalls and changing soffits. Inner cores are hydraulically collapsible and outer forms roll back on tracks.

Vault/box forms are like Tower forms with some differences. Vaults will have a fixed core to create a 5-sided structure. Cores can have multiple chambers, slopes, and depths. Side forms can be rolled away, lifted away, or hydraulically opened to lay flat.

Optional Features Include:

  • Multiple vibration choices built into cores and sides
  • Saf-T-Mate™ Catwalk System

Battery Mold

Battery Molds are an efficient way to produce panel and wall sections vertically. Two stationary forms are typically built with a catwalk between them allowing for a safe and easy working platform to both molds. A soffit bolts in place on the support framework for the outside form to roll into place against while casting. After casting, the outside form rolls away for easy striping. Top-ties and underties spaced properly maintain critical dimensional tolerances. Soffits can be elevated on risers to vary panel heights. Mats may be used for almost any textured finish.

Optional Features include:

  • Integral pour spouts for narrow products.
  • A variety of top and end configurations are available.
  • End bulkheads as well as internal headers allow for product size changes.
  • Multiple soffit widths are available for use with the same forms.
  • Saf-T-Mate™ Catwalk System

Casting Tables and Deck Slabs

Steel top Casting Tables And Deck Slab Forms are being utilized for casting a variety of flat products by precasters. The size and type of product will dictate the type of form needed for your application. Forms can be a flat top design or can have one or both sides fixed for both self-stressing and non-self-stressing forms. Skin thickness can vary from 1⁄4” thick to 1⁄2” thick depending on your product requirements and preferences. Seam condition and seam position can be designed to fit your needs.

Optional Features Include:

  • Bolt down or magnetic rails
  • Vibrotrack™ on bottom or side of form
  • Gravity abutments or integral stressing ends
  • Single and dual surface product headers

Supporting Equipment Available:

  • Stressing Jacks
  • Power Units and Carts
  • Positioning Frames
  • Tarp/Screed Carts
  • Utility Casting Machines
  • Flat Deck Cleaner

Installation & Anchoring Forms


Stadia Forms

Hamilton Form’s extensive experience in stadia projects can provide a competitive edge for the precast producer. Depending on the number of cross sections and the quantity of each product, our team can help determine an economical and efficient formwork package. Forms can be designed self-stressing or non-self-stressing depending on your needs. Typical designs include single and multiple risers, L-shapes, drop stems, and Tub sections.

Optional Features Include:

  • Single surface product headers
  • Skewed single surface product headers
  • Hinged back pan assemblies
  • Deck fillers and back pan risers for minor form adjustments
  • Stem fillers for drop stems
  • Magnetic rails for easy adjustment

Supporting Equipment Available:

  • Stressing Jacks
  • Power Units and Carts
  • Strand Needles

Installation & Anchoring Forms


Pilings and Cylindrical Pilings

Piling Forms and Cylindrical Piling Forms are available in many sizes and types to meet your requirement and specifications. Square piling forms can be single, dual, triple, or quad lines. Piling sizes can vary from 12” to 36” in size. While these forms are typically designed for your stressing load requirements, non-self-stressing forms are available. Octagonal shapes can be designed in multiple lines if required. Cylindrical Piling are available in your required diameter with hydraulic actuated voids for efficient production and labor savings.

Optional Features Include:

  • Void hold down devices
  • Dual-casting surface product headers
  • Multi-piece dual surface headers with removable center plates
  • Multiple jacking plates or multiple strand patterns in jacking plates
  • Removable form sections to meet your length requirements for cylindrical pile
  • Drop-down sections to allow easy handling on cylindrical pile

Supporting Equipment Available:

  • Piling cleaner Machine
  • Stressing Jacks
  • Power Units and Carts
  • Tarp Carts
  • Strand Needles

Installation & Anchoring Forms


Beams and Columns

There is a wide variety of shapes, sizes, and complexity required today’s marketplace for beams and columns. This requires a wide variety of form designs to meet your present and future needs. Some of the form types available include self-stressing vessel designs, table and side form designs, and soffit and side form designs. Hamilton Form Company will design a forming solution to meet your requirements today and in the future.

Optional Features Available:

  • Multiple haunch and corbel designs
  • Vibrotrack™
  • Single and dual surface product headers
  • Roll-back side forms on tracks
  • Arched and sloped soffits
  • Multiple top tie and under tie designs
  • Multiple form lifting devices

Supporting Equipment Available:

  • Stressing Jacks
  • Power Units and Carts
  • Strand Needles

Installation & Anchoring Forms


Bridge Girder

State and AASHTO Girder Side Forms and Soffits are typically designed to be non-self-stressing and are installed between abutments at the precast plant. Forms can be a split design to allow use of internal fillers to produce multiple products using the same top and bottom components. Under form ties and top ties are normally used to hold dimensional tolerances. Multiple form section lengths can be used to adjust your required casting length as well as future bed modifications.

Optional Features Include:

  • Vibrotrack™ in single or multiple locations
  • Multiple lifting device designs
  • Product headers
  • Multiple top tie designs
  • Roll-back side forms on wheels and tracks
  • EZ-Roll Form Movement System
  • Saf-T-Mate™ Catwalk System

Optional Features Include:

  • Stressing Jacks
  • Power Units and Carts
  • Embed and Beveled Plates
  • Strand Needles

Haunch Girder

Haunch Girder forms are designed and manufactured to meet the specific geometry for a specific job. A soffit is supported on a framework to hold the specific slope or radius required for the bottom of the girder. Sideforms are configured to the necessary cross-section throughout the girder from center to end to include thickened areas for load support. Forms are designed to overcome the large hydrostatic loads that are developed. Top-ties and underties spaced properly maintain critical dimensional tolerances.

Optional Features Include:

  • Multiple vibration choices can be built into the forms.
  • Several approaches to handling the forms can be customized to meet specific needs.
  • Multiple pour access openings can be added as required.
  • Saf-T-Mate™ Catwalk System

Supporting Equipment and Components Available:

  • Stressing jacks
  • Power Units and carts
  • Embed and Beveled Plates