Utility Casting Machines

Hamilton Form Company’s Utility Casting Machines are our upper tier Production Machines designed to handle heavy tasks in your production process. Machines are custom designed to meet you needs for increased productivity, labor savings, and quality consistency. All machines are engineered to be self-contained and self-propelled on several wheel platforms. The wide variety of options allow you to get the machine to fit your exact requirements.

Availalble Options Include:

  • Vibrating and oscillating screeds
  • Strand pulling legs
  • On-board air compressor
  • On-board Auto-Crane
  • Header storage and transfer
  • Hand-held remote-control operation
  • Brush form cleaning system
  • On-board operator station or walking controls

Watch Video

Tarp/Screed Machines

Hamilton Form Company’s tarp carts are our lower tier Production Machines designed to handle multiple tasks in your production process. Highly practical and versatile, Hamilton Form carts are designed to be self-contained and self-propelled on several drive wheel platforms. Our carts allow a single operator to roll and unroll tarps and curing blankets of any length, greatly reducing wear, tear and labor time in an employee safe process.

Availalble Options Include:

  • Strand pulling
  • Multiple interchanging spools for different beds
  • Oscillating screed
  • Hand-held remote control operation
  • Drive on form or steel track
  • Drive-on, steerable rubber tire

Watch Video

Square Spiral Machines

The Square Spiral Forming Machine forms 6″ to 30″ continuous square spirals from wire up to 3/8″ diameter. The machine is powered by a 10 hp electric motor coupled to a variable displacement hydraulic pump. The pump displacement is variable for precise speed control without buildup of heat. The forming head jog and reverse functions are incorporated into push button controls. The forming head speed is continuously variable from 10 to 45 rpm. The predetermining electronic counter can be preset for a given number of turns per coil. The forming machine stops automatically after the preset number of turns is formed to eliminate manually counting back each time a coil is cut off. The counter keeps track of the batch count as well. The forming head stops automatically when the guard is raised. The different sized heads can be accommodated by moving the follower head carriage assembly toward or away from the forming head. The forming heads are mounted with split taper bushings for easy changeout.

Setup time is minimal due to quick release cam levers incorporated into the adjustments throughout the machine. An external air supply capable of 120 psi at very low volume is required to charge the air cylinder which acts as a spring on the follower head carriage.

Watch Video