Pull-Type Jacks

Hamilton Form’s Pull-type Tensioning Jacks are commonly used for single stroke tensioning on long-line forms where handling equipment is available and there is ample room at the end of the bed.

Tensioning jacks are available in 36″, 48″ and 60″ strokes for 1/2″ or .6 strand. A “Y”-chain sling is included for easy manipulation into strand, a magnetic torpedo level is included to make sure the unit is level and an anti-twist bar on the pulling yoke can be used to measure elongation.

PS-3500 FOR 1/2″ STRAND SPECIFICATIONS:

• MODEL: PS35K/36/JACK

• capacity: 35,100 pounds

• Tensioning Stroke: 36 inches

• Ram Pull Area: 10 square inches

• Nose Length: 9 inches

• Overall Length: 105 inches

• Weight: 250 pounds

• MODEL: PS35K/48/JACK

• Capacity: 35,100 pounds

• Tensioning Stroke: 48 inches

• Ram Pull Area: 10 square inches

• Nose Length: 9 inches

• Overall Length: 129 inches

• Weight: 290 pounds

• MODEL: PS35K/60/JACK

• Capacity: 35,100 pounds

• Tensioning Stroke: 60 inches

• Ram Pull Area: 10 square inches

• Nose Length: 9 inches

• Overall Length: 153 inches

• Weight: 328 pounds
  

PS-4600 FOR 0.6 STRAND SPECIFICATIONS:

• MODEL: PS46K/48/JACK

• Capacity: 47,000

• Tensioning Stroke: 48 inches

• Ram Pull Area: 16.49 square inches

• Nose Length: 9 inches

• Overall Length: 130 inches

• Weight: 425 pounds

• MODEL: PS46K/60/JACK

• Capacity: 47,000

• Tensioning Stroke: 6048 inches

• Ram Pull Area: 16.49 square inches

• Nose Length: 9 inches

• Overall Length: 530 inches

• Weight: 460 pounds